蒙自RES system sealing tool
Our system components are customized according to your needs to meet your customized system configuration.
类别：
产品描述
Heating resistance
The heating resistance is made of a special alloy. The material is Alloy-20. The temperature coefficient of this material is 1100 μ Ω/Ω * K, that is, when the temperature changes by 1 ℃, the change ratio of resistance is 0.0011, and the accuracy is very high. Of course, it is also very sensitive to the current and voltage measured in the line.
At present, there are three kinds of heating plate materials that can be used together with the heat seal controller: Alloy-20, NOREX, and Vacodil. The main difference of the three materials is the difference of their own characteristics and temperature coefficient, of which Alloy-20 is the most economical and commonly used.
fixture
Recommended installation size of ROPEX:
Spring device clamp: applicable to heat sealing grid with length of more than 1500mm
Fixture with shaft device: applicable length is 200-1500mm
Size range of ROPEX thermal barrier:
Maximum length of heating area: 7m
Maximum width of heating area: 40mm
Address: 607, Environmental Protection Building, 2003
Dongxiao Road, Luohu District, Shenzhen
P.C.：518000
Tel：+86-0755-25625722
Fax：+86-0755-25625733
E-mail：info@szlinxi.com
Copyright：Shenzhen Linxi Electromechanical Technology Co., Ltd
Message