ROPEX heat seal controller RES-5011

Precise guiding and fixing of the film is also important for accurate and repeatable temperature control of high-quality thermal seals. To this end, ROPEX provides a variety of complementary components that can best interact with sealing tools. If you need more information, please contact our engineer.

Details

Waterproof heat sealing grid FS series

Waterproof thermal barrier is used under wet or corrosive conditions, for example, if the machine must be cleaned regularly with water or liquid detergent. If the packaged product itself is corrosive (such as salt water, juice, etc.), these heat sealing grids are also applicable. The special coating and sealing contact area shall meet IP65 protection level. The length of the heating wire of the waterproof heat sealing grid is from 100 mm to 500 mm, increasing every 50 mm. They can also provide heating pipelines from 500mm to 1000mm in length, increasing every 100mm. The standard heating line width is 2.8 mm, 4.8 mm and 6.0 mm.

Due to design reasons, there are 1.5 meters long cables in the contact area of the waterproof thermal barrier. All the above combinations of heating wire length and width provide three different cable sockets for easier integration into the machine:
D: Vertical downward outlet of cable
S: The cable runs vertically on the side

50: The outlet of the cable is the extension of the heating line

 

Standard heat sealing grid GW series

 

The standard heat sealing grid is UPT heat sealing rod used under normal conditions, that is, it is neither wet nor corrosive.
ROPEX standard size range:
Width: 10mm-15mm
Height: 25-26mm
Length: 100mm-1000mm
Heating width: standard: 2.8mm 4.8mm 6mm,
Customized: 2.8-6mm

 

 

Tolerance accuracy of horizontal plane of heat sealing grid: 0.001mm

 

Round heat sealing grid

 

The circular heat sealing grid is used to create a closed, circular sealing joint, for example, if the nozzle needs to be fused into a plastic bag or bag. Tools with 1 inch, 2 inch or 3 inch diameter nozzles are currently available. Other diameters are also available upon request.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Customized thermal barrier

 

Precise guiding and fixing of the film is also important for accurate and repeatable temperature control of high-quality thermal seals. To this end, ROPEX provides a variety of complementary components that can best interact with sealing tools. If you need more information, please contact our engineer.

 

Our sealing tools can also be customized according to your personal requirements. Close cooperation and coordination with customers is very important for us: your sealing tools are designed and manufactured on our CAD system according to the specific parameters of your heat sealing process and the space provided by the machine. Special temperature distribution and overlapping or individually controllable heating lines are possible, and we can also achieve any desired heating line geometry.

 

 

 

 

 

Keywords:

heat the sealing of is and to heating grid

Online Inquiry

操作
Submit an inquiry
图片名称

Message

Please describe in detail the problem you need to consult, we will arrange the Commissioner to contact you in time

Submit